Cable Tracker

  • eosgsadm
  • 18/10/2016


Cable Tracker

Network ID Kit

Designed Specifically for Network Maintenance Professionals

The Cable Tracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The Cable Tracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing.

Cable Tracker

Why Cable Tracker

  • Quickly locate cable termination points/ports or  identify individual wires/pairs with an audible tone
  • The built-in low battery indicator helps you avoid Cable Tracker downtime.


Cable Tracker Features
Activate link lights to identify a connected hub or switch port
Transmits four audible tones
RJ-45 male or female connection
Detachable DMM alligator clips
Detects short or open circuits
Cable Tracker Network ID Kit


Cable Tracker Physical Characteristics
Signal Generator (CT10)
Dimensions 3.0 in x 2.4 in. x 1.4 in. 76 mm x 66 mm x 36 mm
Probe (CT15)
Dimensions 8.0 in x 1.4 in. x 1.5 in. 203 mm x 36 mm x 38 mm
Power Supply One 9 volt battery each for CT10 and CT15
Operating Temperature 32 °F to 122 °F / 0 °C to 50 °C
Storage Temperature 14 °F to 131 °F / -10 °C to 55 °C
CT10 Signal Frequencies
LoTone 1000 Hz pulsed
HiTone 8kHz pulsed
CT15 Reception Frequencies
Broadband 100 – 20000 Hz

Cable TrackerLU_CableTracker_2016


  • Tone CT10
  • Probe CT15
  • RJ-45 Patch Cable
  • Red Test Lead with Alligator Clip
  • Black Test Lead with Alligator Clip
  • Carrying Case
  • Manual