CableMaster 800

  • eosgsadm
  • 18/10/2016

Cable_Master_800_2015CableMaster 800

Professional Cabling Tester for Data, Voice and Video

Professional Cabling Tester and Network Diagnostic Tool

CableMaster 800 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 800 verifies the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporting software. In addition, the CableMaster 800 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE tests and much more.

The CableMaster 800 is perfectly suited for professional installers and network operators who are challenged with testing and troubleshooting network (RJ45) and coaxial cabling in active networks.

CableMaster 600 is perfectly suited for professional installers and network operators who are challenged with testing network (RJ45) and coax cabling, verifying the correct wiring, determining cable lengths and documenting all this in test reports.

CableMaster 800CableMaster_600_Detail

Why CableMaster 800

  • Test your network and coax cabling quickly and conveniently (RJ45 and F-coaxial connectors)
  • Get an overview of the correct cable wiring with a graphical display in wire map format
  • Determine cable lengths and distance to cable faults with a full TDR measurement
  • Carry out a PoE load test to ensure trouble-free operation of PoE devices (displays voltage and power)
  • Quickly document your work within a blink of the eye with screenshots of your test results
  • Keep an overview on running networks with the additional active testing features of CableMaster 800

CableMaster 800 Features
Tests network and coaxial cables (RJ45 jack and F-type connector)
Displays wire map in graphical format for rapid troubleshooting
Determines cable length and distance to the cable fault performing a full TDR measurement
Cable/port identification using the cable/port ID remotes
PoE detection and load test
Link test up to 1 Gb/s to identify link capability and current link status
Pinging of individual or lists of IPv4 and IPv6 addresses as well as any URL on internet
Network Discovery creates lists of broadcasted devices
CDP/LLDP/NDP and VLAN discovery
High resolution color display for excellent readability in any environment
Generation of test reports and documentation with PC-based reporting software


CableMaster 800 Physical Characteristics
General specifications
Measurement Technology Time Domain Reflectometry (TDR) and capacity
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Supports 8 continuity and ID numbers remotes (RJ 45)
Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE)
Active Ethernet Indicates advertised speeds of 10/100/1000 base-T half or full duplex
Can Link to network at 10/100 base-T
Network Discovery Test Discovers and displays attached network devices
Ping IPv4/URL/IPv6
LLDP/CDP identification
TCP/UDP Connectivity test
Port LED blink link in 0,1 Hz-steps
Reporting PDF/CSV reports with PC- Software
Maximum Voltage Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
RJ Jack: 66 Vdc or 55 Vac
F-connector: 50 Vdc or Vac
Save Test Results Stores up to 250 Cable or network tests with user defined names
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, French, German, Spanish
Battery Life For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typical
Standby – 1.5 years typical
(200 uA max standby current), Batteries are included
Altitude 10.000 ft (3048 m) operating
Temperature Operating: 32 to 122°F (0 to 50°C)
Storage -22 to 140°F (-30 to 60°)
Humidity 10 to 90% non-condensing
Enclosure High-strength PC/ABS plastic with VO rating with boot
Withstands 4 foot drop on to concrete
Display Full color graphical LCD with 7,1 cm diagonal
Size 1.85″H x 3.6″W x 6.8″L (4.7 x 9.15 x 17.3 cm)
Weight With batteries: 1 lb 2 oz (510 g)
Safety Compliances CE conforming

CableMaster 800


CableMaster 800

  • Cable tester, incl. 1 network/tel testing and ID remote
  • 6x AA batteriesLU_CableMaster600_2015_neu3
  • 2x RJ45 cables
  • Micro USB cable
  • Pouch

CableMaster 850

  • Cable tester, incl. 1 Cable Tracker CT15 tone probe
  • 8 network/tel testing and ID remotes
  • Cable assembly RJ45 to alligator clips
  • No. 1-20 coax ID remotes
  • 6x AA batteries
  • 9x RJ45 cables
  • Micro USB cable
  • Pouch

Downloadable Documents