NetXpert 1400

  • eosgsadm
  • 18/10/2016

NetXpert_2015NetXpert 1400

Gigabit LAN Qualifier with Network Diagnostic Tool

Easy Cable Testing and Ethernet Speed Certification

The NetXpert 1400 provides a complete solution for cable qualification and troubleshooting of active networks, enabling rapid, simple verification and documentation of the capability of cabling links to support Gigabit  Ethernet operation compliant with the IEEE 802.3ab standard.

Irrespective of the category of cables and connectors installed, a “Pass/Fail” result indicates whether the existing cabling can support data rates up to 1Gbit/s.

NetXpert 1400NetXpert_Detail

Why NetXpert 1400

  • Easy-to-use touchscreen helps you work faster
  • Increase your productivity with pdf test report generation directly on the tester
  • Extremely capable – on top of its qualification measurements, the NetXpert 1400 is able to perform active network tests
  • Rigorous testing – NetXpert 1400 combines three test methods to test a data network for Gigabit Ethernet speed capability
  • All day operation – even on long working days, with the battery pack of NetXpert 1400 delivering more than 10 hours of operation

NetXpert 1400 Features
Tests network cabling and coaxial cabling
Qualifies data cabling for IEEE 802.3 compliance at transmission rates of up to 1Gbit/s (BERT)
Determines signal-to-noise ratio (SNR)
Measures delay skew
Performs full TDR for pair length and distance to fault measurements
Full-color wire map shows opens, shorts, miswires, and split pairs
Results can be saved in the tester, and standards-based measurement reports providing ”Pass/Fail“ results can be generated


NetXpert 1400 Physical Characteristics
General specifications
Measurement Technology Time Domain Reflectometry (TDR) and capacity
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Distance to fault: 0 to 200 m ± (5% + 1m)
Supports 8 continuity and ID numbers remotes (RJ 45)
Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet Tests for IEEE 802.3af and IEEE 802.3at (PoE +) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE)
Active Ethernet Indicates advertised speeds of 10/100/1000 base-T half or full duplex
Can Link to network at 10/100 base-T
Maximum Voltage Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
– RJ Jack: 66 Vdc or 55 Vac
– F-connector: 50 Vdc or Vac
Save Test Results Stores up to 250 Cable or network tests with user defined names
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, French, German, Spanish
Battery Li-Ion Akku, 7,2 VDC, 5,500 mA-hr (typical)
Battery Life – ca. 32 hrs, 16 hrs with gigabit link, 55 hrs stand-by
Temperature Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to 140°F (-30 to 60°)
Humidity 10 to 90% non-condensing
Enclosure High-strength PC/ABS plastic with VO rating with boot
Withstands 4 foot (1,20m) drop on to concrete
Display 3,5“ Color Touch Screen Display
Size 6 x 10 x 23 cm
Weight With batteries 508 g

NetXpert 1400



  • NetXpert Main UniLU_NetXpert
  • Active Remote
  • 2x Power Supply
  • 4 GB SD Card
  • Micro USB cable
  • 1set Network and coax remote set (each #1-5), F-conn coupler
  • 2x Network patch cable
  • 2x Sacrificial cable
  • Hanging strap and clip
  • Hard carrying case

Downloadable Documents