Prysmian Sirocco Tube Distribution Closure (TDC) MK II Accessories & Tools

  • eosgsadm
  • 09/01/2012

prysm_sirocco_tdc_mkii_acc5mm Tube End Caps
5mm Tube End Caps are used to provide a watertight seal to the unused ends of the Blown fibre tubes, within the Tube Distribution Closure.

5mm Straight Connectors
5mm Straight Connectors are used to connect Blown Fibre tubes within the Tube Distribution Closure. The connectors provide a watertight seal between the tubes.

TDC Silicone Grease
Silicone Grease, is used when installing the TDC In – Line Port Seals. The use of this grease ensures correct and easy installation of the In Line Seals. Grease is required to provide IP68 seal.

One 100g tube will be sufficient for installing approximately 40 TDC’s.

TDC Silicone Sealant
Silicone Sealant, is used when installing the TDC In Line Port Seals. The use of this sealant ensures correct installation between the In Line Seals and the cable. Sealant is required to provide IP68 seal.

One 310ml cartridge will seal approximately 40 TDC’s.

TDC Cable Gland Spanner
The TDC Cable gland Spanner is used to install the Cable Glands into the TDC. The spanner is a special size and shape to enable access to the gland nuts on the inside of the closure.

TDC Knock Out Tool Kit
The TDC Knock Out Tool is designed to knock out the side and end ports of the TDC for installation of Side Port and End Port Cable Glands. The kit comes complete with 1 x 40mm Knockout head, 1 x 30mm knockout head and threaded handle.

Name Description
XBFSC00075 Sirocco 5mm Straight Connectors (pack of 10)
XBFSC00260 Sirocco TDC Silicone Grease – Pack of 5x100g Tubes
XBFSC00250 Sirocco TDC Cable Gland Spanner
XBFSC00277 Sirocco TDC Knock Out Tool Kit